Siromer Scotland
Compact Tractors and Machinery in Scotland
Tel: 01253799029
email: tractors@siromer.co.uk
HEDGE TRIMMER
FINGER BAR HEDGE TRIMMER 4.6M REACH
Siromer's high reach finger bar hedge trimmer can be operated by 24 - 75hp tractors and can reach up to 4.6m away horizontally and up to 5.8m vertically.
This trimmer is able to cut on top of a 3.7m hedge with a 1.9m cutting head and is able to cut on the left and right side.
Operated by the tractors PTO and complete with double hydraulic pumps allowing the head to be kept oscillating whilst changing position.
FLAIL/FINGER BAR HEDGE TRIMMER 3.5M REACH
Siromer Hedge Trimmers are designed to fit industry standard CAT I linkages.
Siromer’s high reach hedge trimmers are fitted with a PTO driven hydraulic pump, which means the hedge trimmer is independent of the tractor’s hydraulics.
The finger bar and flail heads are interchangeable.
The hedge trimmer comes as standard with a 0.8cm flail head, there is an option to change this for a 1m head and the finger bar head can be purchased separately.
FLAIL HEDGE TRIMMER 3.7M REACH
Siromer’s high reach hedge trimmers are fitted with a PTO driven hydraulic pump, which means the hedge trimmer is independent of the tractor’s hydraulics.
With a 4.5m horizontal reach and 3.7m vertical reach, capable of cutting on top of a 2.5m hedge.
This hedge trimmer is fitted with a PTO driven hydraulic pump, which means the hedge trimmer is independent of the tractor’s hydraulics.
Fitted with a 1.3m flail head.
Requires 50 – 90 HP Category II linkage.
FLAIL HEDGE TRIMMER 6.2M REACH
Siromer’s G6 Hedge Trimmer is PTO driven and fitted with its own hydraulic pump and 180 liter hydraulic tank, which means there are no additional hydraulic requirements.
The trimmer is capable of cutting on top of a 4.7m hedge with a 6.2m horizontal reach and 1.3m Head.
Available with either cable controls (G6C) or electronic controls (G6E)
Requires 75– 120HP Category II linkage.
